海藻糖标准样品的研制

研制了海藻糖国家标准样品。以食品级海藻糖粗品为原料,纯化制备海藻糖,采用红外光谱(IR)、质谱和核磁共振谱(NMR)以及单晶衍射等方法进行结构确证。样品分装成400瓶后,采用离子色谱法进行均匀性、稳定性检验和定值分析。从样品中随机抽取15瓶进行均匀性检验,经F检验表明,在95%的置信区间范围内,样品均匀性良好。在40℃下,经过24个月稳定性考察,结果表明样品稳定性良好。标准样品经国内8家具有分析资质的实验室进行协同定值,并评定了定值结果的不确定度,海藻糖标准样品定值结果为99.72%,扩展不确定度为0.26%(k=1.96)。该标准样品达到国家标准样品的技术要求,可用于有关海藻糖的方法校正和质量控制。     

Iron–Oxalato Framework with One‐Dimensional Open Channels for Electrochemical Sodium‐Ion Intercalation

Discovery of a new class of ion intercalation compounds is highly desirable due to its relevance to various electrochemical devices, such as batteries. Herein, we present a new iron–oxalato open framework, which showed reversible Na⁺ intercalation/extraction. The hydrothermally synthesized K₄Na₂[Fe(C₂O₄)₂]₃ ? 2 H₂O possesses one‐dimensional open channels in the oxalato‐bridged network, providing ion accessibility up to two Na⁺ per the formula unit. The detailed studies on the structural and electronic states revealed that the framework exhibited a solid solution state almost entirely during Na⁺ intercalation/extraction associated with the reversible redox of Fe. The present work demonstrates possibilities of the oxalato frameworks as tunable and robust ion intercalation electrode materials for various device applications.     

Mesoporous Carbon Nanofibers Embedded with MoS2 Nanocrystals for Extraordinary Li‐Ion Storage

MoS₂ nanocrystals embedded in mesoporous carbon nanofibers are synthesized through an electrospinning process followed by calcination. The resultant nanofibers are 100–150 nm in diameter and constructed from MoS₂ nanocrystals with a lateral diameter of around 7 nm with specific surface areas of 135.9 m² g^?1. The MoS₂@C nanofibers are treated at 450 °C in H₂ and comparison samples annealed at 800 °C in N₂. The heat treatments are designed to achieve good crystallinity and desired mesoporous microstructure, resulting in enhanced electrochemical performance. The small amount of oxygen in the nanofibers annealed in H₂ contributes to obtaining a lower internal resistance, and thus, improving the conductivity. The results show that the nanofibers obtained at 450 °C in H₂ deliver an extraordinary capacity of 1022 mA h g^?1 and improved cyclic stability, with only 2.3 % capacity loss after 165 cycles at a current density of 100 mA g^?1, as well as an outstanding rate capability. The greatly improved kinetics and cycling stability of the mesoporous MoS₂@C nanofibers can be attributed to the crosslinked conductive carbon nanofibers, the large specific surface area, the good crystallinity of MoS₂, and the robust mesoporous microstructure. The resulting nanofiber electrodes, with short mass‐ and charge‐transport pathways, improved electrical conductivity, and large contact area exposed to electrolyte, permitting fast diffusional flux of Li ions, explains the improved kinetics of the interfacial charge‐transfer reaction and the diffusivity of the MoS₂@C mesoporous nanofibers. It is believed that the integration of MoS₂ nanocrystals and mesoporous carbon nanofibers may have a synergistic effect, giving a promising anode, and widening the applicability range into high performance and mass production in the Li‐ion battery market.     

芳香寡聚磺酸酯桥联大环化合物的合成及其对Sn2+和Bi3+的识别作用

以4,6-二烷氧基-1,3-苯二磺酰氯和芳香二酚为原料,三乙胺作缚酸剂,二氯甲烷作溶剂,采取一步成环法合成了3种磺酸酯桥联大环化合物。合成产物的结构用IR、¹H NMR、¹³C NMR和MALDI-TOF等技术手段进行了确认。利用紫外光谱分析的方法研究了4,6,16,18-四正戊氧基-11,23-二甲基-1,3,13,15-四磺酸酯间苯芳香大环(5)对Ca²⁺、Pb²⁺及部分过渡金属等20种金属离子的识别。结果发现,其对Sn²⁺显示出一定的选择性,由于Sn²⁺和Bi³⁺协同作用的影响,在化合物5-Sn²⁺的体系中加入Bi³⁺,紫外吸收光谱在325 nm左右的吸收增强了许多,这说明化合物5对Bi³⁺显示出优于Sn²⁺的较好选择性。     

二价与四价金属离子等摩尔共掺杂的锂离子电池正极材料LiMn1.9Mg0.05Ti0.05O4的制备与表征

以氢氧化锂、乙酸锰、硝酸镁和钛酸丁酯为原料, 以柠檬酸为螯合剂, 采用溶胶-凝胶法制备了二价镁离子与四价钛离子等摩尔共掺杂的尖晶石型锂离子电池正极材料LiMn_1.9Mg_0.05Ti_0.05O₄. 采用热重分析(TGA), X射线衍射(XRD), 扫描电子显微镜(SEM), 透射电子显微镜(TEM)和电化学性能测试(包括循环伏安(CV)和电化学交流阻抗谱(EIS)测试)对所得样品的结构、形貌及电化学性能进行了表征. 结果表明: 780℃下煅烧12 h 得到了颗粒均匀细小的尖晶石型结构的LiMn_1.9Mg_0.05Ti_0.05O₄材料, 该材料具有良好的电化学性能, 在室温下以0.5C倍率充放电, 在4.35-3.30 V电位范围内放电比容量达到126.8 mAh·g^-1, 循环50 次后放电比容量仍为118.5mAh·g^-1, 容量保持率为93.5%. 在55℃高温下循环30次后的放电比容量为111.9 mAh·g^-1, 容量保持率达到91.9%, 远远高于未掺杂的LiMn₂O₄的容量保存率. 二价镁离子与四价钛离子等摩尔共掺杂LiMn₂O₄, 改善了尖晶石锰酸锂的电子导电和离子导电性能, 使其倍率性能和高温性能都得到了明显的提高.     

裂解-气相/质谱法分析木屑物证

木屑是一种在各种案件现场中出现几率较高的微量物证,但由于其化学组成复杂、难溶,高分子组分之间的差异不显著,所以一直未建立有效的鉴定方法.采用裂解-气相/质谱技术(PY-GC/MS)对不同树种木屑难溶物进行分析,结果发现:不同树种木屑难溶物的总离子流图特征相似,即每种木屑难溶物的总离子流图中都有一组特征峰.但个别组分有差异.     

Separation and characterization of oxidized isomeric lipid–peptide adducts by ion mobility mass spectrometry

Phospholipids are major components of cell membranes and lipoprotein complexes. They are prone to oxidation by endogenous and exogenous reactive oxygen species yielding a large variety of modified lipids including small aliphatic and phospholipid bound aldehydes and ketones. These carbonyls are strong electrophiles that can modify proteins and, thereby, alter their structures and functions triggering various pathophysiological conditions. The analysis of lipid–protein adducts by liquid chromatography‐MS is challenged by their mixed chemical nature (polar peptide and hydrophobic lipid), low abundance in biological samples, and formation of multiple isomers. Thus, we investigated traveling wave ion mobility mass spectrometry (TWIMS) to analyze lipid–peptide adducts generated by incubating model peptides corresponding to the amphipathic β₁ sheet sequence of apolipoprotein B‐100 with 1‐palmitoyl‐2‐(oxo‐nonanoyl)‐sn‐glycerophosphatidylcholine (PONPC). The complex mixture of peptides, lipids, and peptide–lipid adducts was separated by TWIMS, which was especially important for the identification of two mono‐PONPC‐peptide isomers containing Schiff bases at different lysine residues. Moreover, TWIMS separated structural conformers of one peptide–lipid adduct possessing most likely different orientations of the hydrophobic sn‐1 fatty acyl residue and head group of PONPC, relative to the peptide backbone. Copyright © 2015 John Wiley & Sons, Ltd.     

Nickel‐Rich Layered Lithium Transition‐Metal Oxide for High‐Energy Lithium‐Ion Batteries

High energy‐density lithium‐ion batteries are in demand for portable electronic devices and electrical vehicles. Since the energy density of the batteries relies heavily on the cathode material used, major research efforts have been made to develop alternative cathode materials with a higher degree of lithium utilization and specific energy density. In particular, layered, Ni‐rich, lithium transition‐metal oxides can deliver higher capacity at lower cost than the conventional LiCoO₂. However, for these Ni‐rich compounds there are still several problems associated with their cycle life, thermal stability, and safety. Herein the performance enhancement of Ni‐rich cathode materials through structure tuning or interface engineering is summarized. The underlying mechanisms and remaining challenges will also be discussed.     

Novel polyimides obtained from a new aromatic diamine (BAPO) containing pyridine and 1,3,4‐oxadiazole moieties for removal of Co(II) and Ni(II) ions

Novel, thermally stable polyimides (PIs) containing a 1,3,4‐oxadiazole and pyridine moieties based on a new aromatic diamine 2,5‐bis‐(aminopyridine‐2‐yl)‐1,3,4‐oxadiazole, BAPO, were synthesized. The prepared polymers were soluble in dimethysulfoxide (DMSO) and concentrated sulfuric acid at room temperature as well as in polar and aprotic solvents, such as, N‐methylpyrrolidone (NMP) and N,N‐dimethylacetamide (DMAc) at elevated temperature. Thermal behaviors of the PIs were studied by thermogravimetric analysis/dynamic thermal analysis (TGA‐DTA) and differential scanning calorimetry (DSC). The inherent viscosities of the PI solutions were in the range of 0.38–0.61 dl/g (in DMSO with a concentration of 0.125 g/dl at 25 ± 0.5°C). The removal of Co(II) and Ni(II) ions from aqueous solutions was performed using polymer 6, which was obtained from BAPO and 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (BTDA). The maximum adsorption capacity was observed for Co(II) ion at pH = 7.0 (110.4 mg g^?1, 1.87 mmol g^?1). Copyright © 2015 John Wiley & Sons, Ltd.